Equipment Analytical instruments Electronics fabrication Fieldwork General Laboratory Equipment Imaging Mechanical fabrication Nanofabrication Scientific computing Sequencing Vivarium Facet Equipment Category Group External Use?YesConsultationNo - Any -Animal ResourcesBasic Lab SupportEngineeringEnvironmental Science and InformaticsInstrumental AnalysisMarine ScienceScientific Computing and Data AnalysisScientific ImagingSequencing Clear filters 3D Confocal Raman and Photoluminescence Spectrophotometer Maker: Tokyo Instruments Model: Nanofinder 30 Confocal Raman spectrophotometer, also covering photoluminescence. Additional heating/cryogenic capabilities. 532 and 785 nm lasers are available, along with motorized sample positioner. External Use: Yes | User/Staff Operated Abrasive Blasting machine Maker: Skatblast Model: SKAT CAT 40 Skat Cat Series Blast Cabinets remove rust, paint, and scale quickly! This sandblaster is currently using glass bead media. External Use: Consultation | Staff Operated Abrasive Waterjet Cutter Maker: Wazer Model: G2 Desktop Cutting Area 305 x 460 mm Materials CUTTING SPEED MAX THICKNESS Aluminum 0.5 in 13 mm Mild & Stainless Steel-0.188 in 5 mm Glass-0.5 in 13 mm Plastic-0.5-0.75 in 13-18 mm Composites- 0.313 in 8 mm Tile-0.5 in 13 mm Rubber- 0.5-0.75 in 13-21 mm External Use: Consultation | Staff Operated Advanced Maskless Aligner Maker: Heidelberg Instruments Model: MLA-150 The MLA 150 is a dual wavelength advanced maskless aligner which offers precise, high-speed photolithography with front and backside alignment for prototyping, and small-scale production. External Use: Yes | User/Staff Operated Atomic Force Microscope (AFM) (SPM) Maker: Bruker Model: Icon 3 The Icon is the latest evolution of our industryleading, tip-scanning AFM technology, incorporating temperature-compensating position sensors to render noise levels in the sub-angstrom range for the Z-axis, and angstroms in X-Y. External Use: Consultation | User/Staff Operated Atomic Layer Deposition Maker: Cambridge Nanotechnology Veeco Model: Savannah S200 Savannah is a thermal atomic layer deposition (ALD) system. ALD offers exceptional conformality on high-aspect ratio structures, thickness control at the Angstrom level, and tunable film composition. External Use: Yes | User/Staff Operated Automatic Dicing Saw Maker: DISCO Model: DAD323 The DISCO DAD322 is a precision dicing saw used to cut semiconductor wafers, glass, ceramics, and similar materials into smaller pieces, such as individual chips or devices. External Use: Consultation | User/Staff Operated Ball /Wedge Wire Bonder Maker: TPT Model: HB16 The TPT HB16 model is a Ball/wedge wire bonder that enables electrical interconnection between a device chip and package using a gold wire. External Use: Yes | User/Staff Operated Belt Sander Maker: Mizuho Model: BY47L 100mm wide belt sander/ belt grinder External Use: Consultation | User/Staff Operated Confocal Laser Microscope Maker: Keyence Model: VK-X210 Shape measurement, laser microscope, high-precision, 3D imaging, surface roughness analysis, quality control, research and development, manufacturing, automotive, electronics. External Use: Yes | User/Staff Operated Confocal Microspectrophotometer for UV/VIS/NIR and Raman Maker: CRAIC Model: 20/30 PV Microscope for UV-visible-NIR spectra of sub-micron areas, determines thin film thickness/color spaces. Enables simultaneous high-res imaging and Raman (PL) spectra at 532/785 (405) nm. External Use: Yes | User/Staff Operated Confocal Raman Microscope Maker: Oxford Instruments Witec Model: Alpha300 Apyron Fully automated multi-wavelength confocal Raman spectrometer between visible and near-infrared regimes. Equipped with data analysis and database matching, particle statistics and cryostat included. External Use: Consultation | User/Staff Operated Contour bandsaw Maker: Luxo Model: LE400 General purpose contour bandsaw for sawing metallic and non-metallic materials External Use: Consultation | Staff Operated Contour bandsaw Maker: YS Koki Model: Cut-600 Small contour bandsaw machine External Use: Consultation | User/Staff Operated Coordinate Measuring Machine (CMM) Maker: Zeiss Model: O-Inspect 322 ZEISS O-INSPECT multi-sensor measuring machines enable to optimally measure each characteristic in compliance with ISO-10360 - optically or by contact. Your advantages: Large visual field with high image definition Quick and precise 3D tactile measurements Optical measurements for sensitive surfaces Increased reliability in less time External Use: Consultation | Staff Operated Cryogenic refrigerator with optical vector magnet Maker: Cryogenic Ltd. Model: 5T-2T-2T The OV-CFM system is based on a well-proven modular design incorporating proprietary technology to allow a vector magnet and integrated variable temperature sample space to be operated in a way that allows precise temperature control while varying the magnetic field. The magnet operates dry and no liquid cryogens are required at start up or during operation External Use: No | User/Staff Operated Deep Reactive Ion Etching (RIE) Maker: Samco Model: RIE-400iPB The Samco RIE-400iPB is a dry deep etching system optimized for deep silicon etching utilizing Bosch process with high-aspect-ratio etching with excellent selectivity and minimal scalloping. External Use: Yes | User/Staff Operated Diamond contour bandsaw Maker: Luxo Model: VS-22 Small, light duty diamond bandsaw for use on abrasive and hardened materials. External Use: Consultation | User/Staff Operated Pagination 1 2 3 … Last page
3D Confocal Raman and Photoluminescence Spectrophotometer Maker: Tokyo Instruments Model: Nanofinder 30 Confocal Raman spectrophotometer, also covering photoluminescence. Additional heating/cryogenic capabilities. 532 and 785 nm lasers are available, along with motorized sample positioner. External Use: Yes | User/Staff Operated
Abrasive Blasting machine Maker: Skatblast Model: SKAT CAT 40 Skat Cat Series Blast Cabinets remove rust, paint, and scale quickly! This sandblaster is currently using glass bead media. External Use: Consultation | Staff Operated
Abrasive Waterjet Cutter Maker: Wazer Model: G2 Desktop Cutting Area 305 x 460 mm Materials CUTTING SPEED MAX THICKNESS Aluminum 0.5 in 13 mm Mild & Stainless Steel-0.188 in 5 mm Glass-0.5 in 13 mm Plastic-0.5-0.75 in 13-18 mm Composites- 0.313 in 8 mm Tile-0.5 in 13 mm Rubber- 0.5-0.75 in 13-21 mm External Use: Consultation | Staff Operated
Advanced Maskless Aligner Maker: Heidelberg Instruments Model: MLA-150 The MLA 150 is a dual wavelength advanced maskless aligner which offers precise, high-speed photolithography with front and backside alignment for prototyping, and small-scale production. External Use: Yes | User/Staff Operated
Atomic Force Microscope (AFM) (SPM) Maker: Bruker Model: Icon 3 The Icon is the latest evolution of our industryleading, tip-scanning AFM technology, incorporating temperature-compensating position sensors to render noise levels in the sub-angstrom range for the Z-axis, and angstroms in X-Y. External Use: Consultation | User/Staff Operated
Atomic Layer Deposition Maker: Cambridge Nanotechnology Veeco Model: Savannah S200 Savannah is a thermal atomic layer deposition (ALD) system. ALD offers exceptional conformality on high-aspect ratio structures, thickness control at the Angstrom level, and tunable film composition. External Use: Yes | User/Staff Operated
Automatic Dicing Saw Maker: DISCO Model: DAD323 The DISCO DAD322 is a precision dicing saw used to cut semiconductor wafers, glass, ceramics, and similar materials into smaller pieces, such as individual chips or devices. External Use: Consultation | User/Staff Operated
Ball /Wedge Wire Bonder Maker: TPT Model: HB16 The TPT HB16 model is a Ball/wedge wire bonder that enables electrical interconnection between a device chip and package using a gold wire. External Use: Yes | User/Staff Operated
Belt Sander Maker: Mizuho Model: BY47L 100mm wide belt sander/ belt grinder External Use: Consultation | User/Staff Operated
Confocal Laser Microscope Maker: Keyence Model: VK-X210 Shape measurement, laser microscope, high-precision, 3D imaging, surface roughness analysis, quality control, research and development, manufacturing, automotive, electronics. External Use: Yes | User/Staff Operated
Confocal Microspectrophotometer for UV/VIS/NIR and Raman Maker: CRAIC Model: 20/30 PV Microscope for UV-visible-NIR spectra of sub-micron areas, determines thin film thickness/color spaces. Enables simultaneous high-res imaging and Raman (PL) spectra at 532/785 (405) nm. External Use: Yes | User/Staff Operated
Confocal Raman Microscope Maker: Oxford Instruments Witec Model: Alpha300 Apyron Fully automated multi-wavelength confocal Raman spectrometer between visible and near-infrared regimes. Equipped with data analysis and database matching, particle statistics and cryostat included. External Use: Consultation | User/Staff Operated
Contour bandsaw Maker: Luxo Model: LE400 General purpose contour bandsaw for sawing metallic and non-metallic materials External Use: Consultation | Staff Operated
Contour bandsaw Maker: YS Koki Model: Cut-600 Small contour bandsaw machine External Use: Consultation | User/Staff Operated
Coordinate Measuring Machine (CMM) Maker: Zeiss Model: O-Inspect 322 ZEISS O-INSPECT multi-sensor measuring machines enable to optimally measure each characteristic in compliance with ISO-10360 - optically or by contact. Your advantages: Large visual field with high image definition Quick and precise 3D tactile measurements Optical measurements for sensitive surfaces Increased reliability in less time External Use: Consultation | Staff Operated
Cryogenic refrigerator with optical vector magnet Maker: Cryogenic Ltd. Model: 5T-2T-2T The OV-CFM system is based on a well-proven modular design incorporating proprietary technology to allow a vector magnet and integrated variable temperature sample space to be operated in a way that allows precise temperature control while varying the magnetic field. The magnet operates dry and no liquid cryogens are required at start up or during operation External Use: No | User/Staff Operated
Deep Reactive Ion Etching (RIE) Maker: Samco Model: RIE-400iPB The Samco RIE-400iPB is a dry deep etching system optimized for deep silicon etching utilizing Bosch process with high-aspect-ratio etching with excellent selectivity and minimal scalloping. External Use: Yes | User/Staff Operated
Diamond contour bandsaw Maker: Luxo Model: VS-22 Small, light duty diamond bandsaw for use on abrasive and hardened materials. External Use: Consultation | User/Staff Operated
