Equipment

The Specialty Coating Systems PDS 2010 parylene deposition system provides users with reliable and repeatable conformal parylene coatings.

Physical Property Measurement System: An advanced cryogenic system that facilitates precise material physical characterisation

The Samco AD-800LP is a system designed for precise atomic-scale film deposition. It combines thermal and/or plasma-enhanced ALD capabilities, making it suitable for a wide range of materials, including oxides, nitrides, and conductive films.

The Atto system is a low-pressure plasma cleaner designed for applications such as surface cleaning, activation, etching, and sterilization.

The Nordson March AP-300 plasma system is suitable for a wide variety of plasma cleaning, surface activation and adhesion improvement applications.

The Samco PD-200NL is a Plasma-Enhanced Chemical Vapor Deposition (PECVD) system optimized for high-quality films deposition of silicon dioxide (SiO), silicon nitride (SiN) and amorphous silicon.

The Model 900 is a manual system for grinding or polishing substrate.

Tabletop rapid thermal annealer with near‑infrared lamp heating up to ~1200°C and ~50°C/s ramp rates in vacuum or controlled gas atmospheres.

The Samco RIE-200NL is a dry etching system optimized for silicon-based materials like silicon dioxide (SiO), silicon nitride (SiN), or other nitride and oxide and some metals.

The NanoCalc system is a spectroscopic reflectometry system designed for non-destructive measurement of thin film thicknesses and optical constants on common film stacks.

Peptide Synthesizer.

The MCR302 Rheometer has multiple analysis modes such as the flow, rotational, and oscillatory test with sweeping amplitude or frequency at different temperatures.

Modular compact rheometer for rotational and oscillatory testing with air‑bearing drive and high torque sensitivity.

Compact R&D oxidation furnace for diffusion up to 1300 °C. Wet/dry oxide with modular controls and low power use.

A Large Format 3D Printer Compact Enough for the Office and Robust Enough for the Factory Floor Take control of large-format prototyping and bring your biggest ideas to life with the Form 3L, a cost-effective large scale 3D printer that doesn’t compromise on the details. With a large build volume of 33.5 × 20 × 30 cm (13.2 × 7.9 × 11.8 in), you can print full-scale bulky prototypes or detailed models.

Trusted by tens of thousands of professionals around the world. Whether you need rugged performance parts or accurate details, the Form 3+ delivers.

SLS polymer 3D printing system.

Selective Laser Sintering 3D printer currently set up for use with Nylon 12 powder.