Equipment

Manufacturer: Thermo Fisher Scientific

Manufacturer: FEI Model: Titan ETEM Features: Acc. Voltage: 80 - 300 keV

The Helios is equipped with a dual beam system: a focused gallium ion beam (FIB) for sample processing and an electron beam (SEM) for simultaneous imaging. Our system is mainly used for FIB-SEM tomography of resin embedded biological samples.

Acc. Voltage: 100 keV

Manufacturer: JEOL Model: JEM-ARM200F Features: Acc. Voltage: 60 - 200 keV

The CryoARM200 has a wide pole piece gap, cold-field emission gun, in-column energy filter and operates at an accelerating voltage of 200 kV.

The CryoARM300 is the first of its kind, having an ultra-high resolution pole piece, cold-field emission gun, in-column energy filter and operates at an accelerating voltage of 300 kV, allowing it to obtain sub angstrom resolution in TEM.

Manufacturer: JEOL Model: JSM-7900F Features: A device is capable of SEM imaging in high vacuum and low vaccume mode with mutiple detectors  from low accelerating voltage (100 V) 

The Teneo has a build-in microtome that allows the removal of a thin layer of resin with subsequent imaging of the remaining block-face to acquire high-resolution data of large volumes.

The Talos Arctica has a field emission gun and operates at an accelerating voltage of 200 kV, it is equipped with an autoloader, and a Falcon 3EC direct electron director.

Manufacturer: Thermo Fisher Scientific Model: Talos L120C Features: Acc. Voltage：120 keV Holder: Single-tilt holder, high-field-of-view tomography holder, cryo-holder (Fischione, Model 2550) Camera: FEI Ceta camera

The Titan Krios has a field emission gun and operates at an accelerating voltage of 300 kV, it is equipped with an autoloader, and a Falcon 3EC direct electron director.